Damaged concrete from chemical attack can range from mild corrosion and spalling to major deterioration. CTS can work with you to specify the most cost effective solution for restoring your damaged concrete and for protecting it from future attack. Our line of same day and next day topcoat concrete restoration systems and waterproofing products will repair your structures effectively and economically. Contact CTS with your unique project requirements.
Sauereisen F-120 RestoKrete Underlayment and Repair Mortar
The F-120 RestoKrete™ Underlayment by Sauereisen is a fast setting, high early strength, resurfacing material available in trowelable, castable, or gunite formulations. The F-120 is designed to be used with resinous systems and may be top-coated with an epoxy as early as 5 hours.
Sauereisen F-121 RestoKrete Substrate ReSurfacer
No. F-121 RestoKrete™ Substrate Resurface by Sauereisen is a single component, high strength, rapid set Portland cement based product for repairing, resurfacing and waterproofing masonry structures. This material will restore structural integrity and prevent infiltration in concrete and brick structures. It is designed for rotary and straight shot spray application and can be applied at various thicknesses in one pass.
Sauereisen F-170 SewerSeal
SewerSeal No. F-170 by Sauereisen is a high strength, calcium aluminate-based product to be used as a waterproofing and corrosion-resistant lining for sewage collection structures. This material prevents infiltration and resists mild acids and alkalis on concrete, brick, and steel structures. It is designed for rotary and straight shot applications.
Sauereisen F-180 InstaPlug
No. F-180 InstaPlug by Sauereisen is a rapid setting hydraulic water plug that will seal active water leaks and allow continuous rehabilitation work on concrete structures. This material will set in 60-90 seconds and cure completely in one hour. It is also used to fill small voids and for anchoring applications.
Sauereisen No. 149 ConoCrete
The No. 149 Fast Patch by Sauereisen is a fast setting epoxy that is designed to patch cracks and holes in concrete. It sets in two hours and provides skid-resistance. The No. 149 produces extremely high strengths that can take vehicular traffic in 2 hours and it is excellent for patching ramps, docks, highways, bridge decks, airport runways, traffic aisles, industrial floors, pump pads, grout plates.
Sauereisen No. 208 RestoKrete
The No. 208 RestoKrete™ by Sauereisen substrate repair material and water barrier for inflow and infiltration in concrete and brick substrates. The No. 208 is an epoxy-based mortar designed to fill voids, irregularities, and air pockets in concrete.
Sauereisen No. 209 RestoKrete Epoxy Filler Compound
Sauereisen's No. 209 RestoKrete™ epoxy filler compound is a three component, epoxy formulation that is specifically designed to fill voids, irregularities and air pockets in concrete. No. 209 will provide a smooth surface ready for application of protective compounds in 3 hours. This material is also available in a high build and a fast setting grade that can be top coated in 1 hour. Any of the No. 209 formulations are suitable for application over damp or dry concrete. Application is performed with a rubber K&R trowel.
Sauereisen No. 209-HB RestoKrete Hi-Build Filler Compound
Sauereisen's No. 209-HB RestoKrete™ Hi-Build Epoxy Filler Compound is a three component, epoxy formulation that is specifically designed to fill voids, irregularities and air pockets in concrete. Sauereisen Hi-Build Filler Compound is formulated to minimize sagging in voids as large as 1/2" which permits thick application of the product where necessary. Any of the No. 209 formulations are suitable for application over damp or dry concrete. Application is performed with a smooth plasterer's rubber float.
Steelcote Wall-Nu Trowelable
Wall-Nu Trowelable by Steelcote Manufacturing is a 100% solids trowelable mastic material suitable for patching, coving, lining, adhesive bonding and underlayment for construction, maintenance, and marine use. It creates a very strong bond to a variety of substrates including wood, concrete, masonry, metal, fiberglass, and glass. It may be applied up to 1" thick on vertical surfaces.